[ Home | Liste | F.A.Q. | Risorse | Cerca... ]


[ Data: precedente | successivo | indice ] [ Argomento: precedente | successivo | indice ]


Archivio: openbsd@sikurezza.org
Soggetto: dmesg
Mittente: goony
Data: 11 Jan 2001 09:26:31 -0000
cosa c'e' non mi funziona bene al boot? help me...

> bios0 at mainbus0: AT/286+(8f) BIOS, date 10/09/98
> bios0: diskinfo 0xe055800c cksumlen 1 memmap 0xe0558088 apminfo 0xe0558134
> apm0 at bios0: Power Management spec V1.1
> apm0: AC on, no battery
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82443BX PCI-AGP (PAC)" rev 0x02
> ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP (PAC)" rev 0x02
> pci1 at ppb0 bus 1
> "Nvidia Riva TNT" rev 0x04 at pci1 dev 0 function 0 not configured
> pcib0 at pci0 dev 4 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
> pciide0 at pci0 dev 4 function 1 "Intel 82371AB IDE (PIIX4)" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> atapiscsi0 at pciide0 channel 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 1 lun 0: <ATAPI, CD-ROM DRIVE-32X, 322P> SCSI0 5/cdrom removable
> cd0: can use 32-bit, PIO mode 3, DMA mode 2, Ultra-DMA mode 2
> wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL SE4.3A>
> wd0: can use 32-bit, PIO mode 4, DMA mode 2, Ultra-DMA mode 2
> wd0: 16-sector PIO, LBA, 4110MB, 14848 cyl, 9 head, 63 sec, 8418816 sectors
> pciide0: channel 0 interrupting at irq 14
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 (using DMA data transfers)
> cd0(pciide0:0:1): using PIO mode 3, Ultra-DMA mode 2 (using DMA data transfers)
> atapiscsi1 at pciide0 channel 1
> scsibus1 at atapiscsi1: 2 targets
> pciide0:1:0: IDENTIFY timed out
> cd1 at scsibus1 targ 0 lun 0: <ATAPI, CD-R/RW CRW6206A, 1.2A> SCSI0 5/cdrom removable
> cd1: can use 32-bit, PIO mode 4, DMA mode 2
> pciide0: channel 1 interrupting at irq 15
> cd1(pciide0:1:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> "Intel 82371AB USB (PIIX4)" rev 0x01 at pci0 dev 4 function 2 not configured
> "Intel 82371AB Power Management (PIIX4)" rev 0x02 at pci0 dev 4 function 3 not configured
> unknown vendor 0x1397 product 0x2bd0 (class network, subclass miscellaneous, rev 0x02) at pci0 dev 10 function 0 not configured
> ne3 at pci0 dev 11 function 0 "Realtek 8029" rev 0x00 irq 5
> ne3: address 00:00:21:c3:ec:a0
> isa0 at pcib0
> isadma0 at isa0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> vt0 at isa0 port 0x60/16 irq 1: generic VGA, 80 col, color, 8 scr, mf2-kbd
> pms0 at vt0 irq 12
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> isapnp0 at isa0 port 0x279: read port 0x203
> sb1 at isapnp0 "Creative ViBRA16X PnP, CTL0043, , Audio" port 0x220/16,0x300/2,0x388/4 irq 9 drq 0,0: dsp v4.16
> midi1 at sb1: <SB MPU-401 UART>
> audio0 at sb1
> opl0 at sb1: model OPL3
> midi2 at opl0: <SB Yamaha OPL3>
> joy0 at isapnp0 "Creative ViBRA16X PnP, CTL7005, PNPB02F, Game" port 0x201/1
> biomask c040 netmask c060 ttymask d0e2
> pctr: 686-class user-level performance counters enabled
> wd0(pciide0:0:0): lost interrupt
>         type: ata
>         c_bcount: 512
>         c_skip: 0
> pciide0:0:0: Bus-Master DMA error: missing interrupt, status=0x61
> wd0c: DMA error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
> wd0(pciide0:0:0): lost interrupt
>         type: ata
>         c_bcount: 512
>         c_skip: 0
> pciide0:0:0: Bus-Master DMA error: missing interrupt, status=0x61
> wd0: transfer error, downgrading to DMA mode 2
> wd0(pciide0:0:0): using PIO mode 4, DMA mode 2 (using DMA data transfers)
> cd0(pciide0:0:1): using PIO mode 3, Ultra-DMA mode 2 (using DMA data transfers)
> wd0c: DMA error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
> wd0(pciide0:0:0): lost interrupt
>         type: ata
>         c_bcount: 512
>         c_skip: 0
> pciide0:0:0: Bus-Master DMA error: missing interrupt, status=0x61
> wd0: transfer error, downgrading to PIO mode 4
> wd0(pciide0:0:0): using PIO mode 4
> cd0(pciide0:0:1): using PIO mode 3, Ultra-DMA mode 2 (using DMA data transfers)
> wd0c: DMA error reading fsbn 0 (wd0 bn 0; cn 0 tn 0 sn 0), retrying
> wd0: soft error (corrected)
> dkcsum: wd0 matched BIOS disk 80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> IP Filter: initialized.  Default = pass all, Logging = enabled


--------------------------------------------------------------------------
informazioni sui comandi supportati da questa ml: http://www.sikurezza.org




[ Home | Liste | F.A.Q. | Risorse | Cerca... ]

www.sikurezza.org - Italian Security Mailing List
(c) 1999-2005